PVC Furniture Price in Ahmedabad
Starting rates, how a rate turns into a number on your estimate, and the things that move it. No login, no form - the figures are on this page.
Where the pricing starts
From ₹350 per sq ft
Plain, without laminate
From ₹600 per sq ft
From ₹1,000 per sq ft
2 years, with a certificate
The material on its own, with no laminate on it, starts at ₹350 per sq ft - the plain PVC face, left as it comes. Almost nobody stops there, because the laminate is what decides how the finished unit looks, so it is quoted separately rather than buried inside one figure.
Framing is the structure that goes against the wall - a store, the carcass behind a kitchen platform. Box work is a finished, closed unit with shutters, shelves and hardware: a wardrobe, a crockery unit, a loft, a shoe cabinet. Most homes need both, which is why one figure alone would not tell you much.
| Modular kitchen | from ₹20,000 |
|---|---|
| TV unit | from ₹25,000 |
| Wardrobe | from ₹35,000 |
| Whole 2 BHK | from ₹2 lakh |
| Whole 3 BHK | from ₹2.5 lakh |
Every figure here is a floor, not a quote. A small kitchen along one wall is near the bottom of it; the same kitchen in a bigger room, with pull-outs and a tall unit, is not. The only number that means anything is the one measured at your home, and that visit is free.
A rate is per square foot of the finished face
Width multiplied by height, in feet, of the front of the unit - not the floor it stands on and not the number of shelves inside. A wardrobe 7 feet wide and 7 feet tall is 49 sq ft. At the box work rate that is about ₹49,000. A store framed along one wall, 8 feet by 7 feet, is 56 sq ft, about ₹33,600 at the framing rate.
The same arithmetic runs down your whole estimate, room by room, one line per unit. Nothing is a lump sum and nothing is hidden inside another figure - you see the size, the rate and the amount for every item.
Drawers, steel baskets and a few other fittings are priced per piece rather than per square foot, because two drawers in a 49 sq ft wardrobe and six drawers in the same wardrobe are not the same job.
Why two homes of the same size cost differently
The laminate
1mm and 1.25mm, and the brand - Crystal, Orian, Hexa, Flexibond, Rama, Lionia. The sheet underneath stays the same; the finish you see does not.
The hardware
Ordinary hinges and channels, or soft-close tandem units and soft-close sliding channels. This is where a kitchen or a sliding wardrobe moves the most.
Drawers and baskets
Priced per piece. They add up quickly in a kitchen, and they are the easiest thing to adjust if a figure comes in above what you had in mind.
CNC and design work
A cut jali partition or a CNC mandir front is slower to make than a flat shutter, and it is priced as its own line.
How much of the home
A kitchen alone and a full home are different jobs. A whole home is measured in one go, which is also when the design is worth settling as one thing rather than room by room.
Site condition
Electricity, water and working space are provided at site. Anything beyond that is talked about before it is priced, not after.
What the rate already covers
Design
Drawn for your rooms and your sizes. There is no separate design charge.
Material and labour
The sheet, the laminate, the hardware, the making and the fitting - all inside the rate.
Transport
Material to your home, included.
No GST added
The figure on the estimate is the figure you pay.
What is not inside it: extra work agreed after the estimate is approved, which is always priced and approved by you before it is started, and any high-end item you ask for specifically.
Fifty, forty, ten
50% when the work starts, 40% midway through, and 10% on completion. Every payment gets a receipt in your app, and the running total of paid and due is on your screen the whole time - you never have to ask where the account stands.
These are starting rates, not your estimate
What you actually pay depends on the material, the laminate and the design you choose. The way to find out is a free site visit: we measure every room properly, and you get an itemised written estimate as a PDF - room by room, rate by rate - before any work begins. The same estimate sits in your own login, where you approve it or ask for a change. No charge and no obligation for the visit.
Other rooms
Seven things to check in any PVC furniture quote
These work with any supplier in Ahmedabad, not only with us. A quote that will not answer them is a quote you cannot compare with another one.
- Hollow board - what does one sheet weigh? Hollow PVC runs from about 5 kg to 11 kg a sheet. Heavier is more material in the same sheet, and that is the whole of the quality difference.
- Solid board - what is the density? Solid PVC runs from 45 to 70. A low density sheet bends under load and the screws work their way out of it over months, long after handover.
- Is the grade written on the estimate? The same laminate goes on good board and poor board, so two units can look identical. A supplier who knows the grade will name it in one word.
- Which hardware, by brand? The sheet does not rot, so hinges and channels are what actually wear out. Ask for the brand in writing - ours is Hettich, Godrej, Rajvanshi, Bansi, Fittingo or Olive, named per piece.
- Is the warranty a certificate or a sentence? Ask to see the document. Ours is 2 years, on paper, with your name and the work covered on it.
- Is the estimate itemised? Every unit with its size, its rate and its amount - not one lump sum for "PVC furniture". A lump sum cannot be checked against anything.
- Is GST on top? Ask before you compare two numbers. On ours it is not: the figure on the estimate is the figure you pay.
We publish this because a customer who can ask these seven questions cannot be sold a 45 density sheet at a 70 density price - by us or by anybody. How solid, hollow, WPC and uPVC differ.
What people ask us
Why are there two rates instead of one?
Because framing and box work are different amounts of work. Framing is the structure against the wall - a store, the carcass behind a kitchen platform - from Rs 600 per square foot. Box work is a finished closed unit with shutters, shelves and hardware, from Rs 1,000. Most homes need both, so a single average figure would mislead in one direction or the other.
Is GST added on top of the estimate?
No. The figure on the estimate is the figure you pay. Design, material, labour, the laminate, the hardware and transport of the material are all already inside the rate.
How do I know the final bill will match the estimate?
Because the estimate is itemised - every unit with its size, its rate and its amount, nothing as a lump sum. If something is added after the estimate it is added as a visible line, and the whole thing stays in your app where you can read it again at any time.
Do you charge for the visit or the design?
Neither. The site visit, the measurement and the drawing are free and carry no obligation. We bring laminate samples to hold against your own wall and light, and leave the written estimate with you.
How much does PVC furniture cost per square foot in Ahmedabad?
PVC furniture in Ahmedabad starts at Rs 600 per square foot for framing and Rs 1,000 per square foot for box work. The square feet are counted on the finished face - width times height of the front, in feet. A 7 foot by 7 foot wardrobe front is 49 square feet, so about Rs 49,000. Most homes need both rates.
What is the starting price for a PVC kitchen or wardrobe?
A modular kitchen starts at Rs 20,000, a TV cabinet at Rs 25,000 and a wardrobe at Rs 35,000. A whole 2 BHK starts at Rs 2 lakh and a 3 BHK at Rs 2.5 lakh. These are starting points for a small room in a plain finish, not a quote - the real figure comes from measuring your rooms.
Nikol, Nava Naroda, Ahmedabad
Mahavir Complex, Hari Villa Road
near Honda Showroom, Bapa Sitaram Chowk
Nikol, Nava Naroda, Ahmedabad
Gujarat 382345
Ravi Vasoya











